Automated Author ProfileNateechai Passadee
Nateechai Passadee
Current S-Index
Sum of Dataset Indices for all datasets
Average Dataset Index per Dataset
Average Dataset Index per dataset
Total Datasets
Total datasets for this author
Average FAIR Score
Average FAIR Score per dataset
Total Citations
Total citations to the author's datasets
Total Mentions
Total mentions of the author's datasets
S-Index Interpretation
The S-Index (Sharing Index) is a comprehensive metric that represents the cumulative impact of all your datasets. It is calculated as the sum of Dataset Index scores across all your claimed datasets.
What it means:
- A higher S-index indicates greater overall impact of your datasets relative to typical datasets in their fields of research
- The S-Index grows as you add more datasets or as existing datasets gain more citations and mentions
- It provides a single number to track your research data impact over time
Current S-Index: 1.3 (sum of 4 datasets Dataset Index scores)
More information here.
S-Index Over Time
Cumulative Citations Over Time
Cumulative Mentions Over Time
Datasets
Abstract The use of silica based bagasse fiber ash (BFA) as a reinforcing filler in polylactic acid (PLA) biocomposites was examined. The effects of surface-treated BFA on the rheological, swelling behavior, and mechanical properties and water absorption of biocomposites were studied. BFA was treated using a silane coupling agent (Bis-[3-(triethoxysilyl)-propy]-tetrasulfide). Composites with BFA were varied from 5 to 25wt.%. The PLA/BFA composite melts were pseudoplastic non -Newtonion fluid and exhibited a shear thinning behavior. The viscosity of the surface-treated BFA biocomposites was higher than that of the untreated. The viscosity of the composites decreased with increasing BFA content and shear rate. The extrudate swell of the composites increased with increasing shear rate, whereas it decreased with increasing BFA content and die temperature. The extrudate swell tended to be suppressed when surface-treated BFA was used. Silane treated BFA composites showed improvement in their mechanical properties, and exhibited significantly reduced water absorption.
Authors
- Watcharin Sitticharoen ;
- Uthiyoung, Chet ;
- Nateechai Passadee ;
- Chanokpol Wongprom
Abstract The use of silica based bagasse fiber ash (BFA) as a reinforcing filler in polylactic acid (PLA) biocomposites was examined. The effects of surface-treated BFA on the rheological, swelling behavior, and mechanical properties and water absorption of biocomposites were studied. BFA was treated using a silane coupling agent (Bis-[3-(triethoxysilyl)-propy]-tetrasulfide). Composites with BFA were varied from 5 to 25wt.%. The PLA/BFA composite melts were pseudoplastic non -Newtonion fluid and exhibited a shear thinning behavior. The viscosity of the surface-treated BFA biocomposites was higher than that of the untreated. The viscosity of the composites decreased with increasing BFA content and shear rate. The extrudate swell of the composites increased with increasing shear rate, whereas it decreased with increasing BFA content and die temperature. The extrudate swell tended to be suppressed when surface-treated BFA was used. Silane treated BFA composites showed improvement in their mechanical properties, and exhibited significantly reduced water absorption.
Authors
- Watcharin Sitticharoen ;
- Uthiyoung, Chet ;
- Nateechai Passadee ;
- Chanokpol Wongprom
Abstract The use of silica based bagasse fiber ash (BFA) as a reinforcing filler in polylactic acid (PLA) biocomposites was examined. The effects of surface-treated BFA on the rheological, swelling behavior, and mechanical properties and water absorption of biocomposites were studied. BFA was treated using a silane coupling agent (Bis-[3-(triethoxysilyl)-propy]-tetrasulfide). Composites with BFA were varied from 5 to 25wt.%. The PLA/BFA composite melts were pseudoplastic non -Newtonion fluid and exhibited a shear thinning behavior. The viscosity of the surface-treated BFA biocomposites was higher than that of the untreated. The viscosity of the composites decreased with increasing BFA content and shear rate. The extrudate swell of the composites increased with increasing shear rate, whereas it decreased with increasing BFA content and die temperature. The extrudate swell tended to be suppressed when surface-treated BFA was used. Silane treated BFA composites showed improvement in their mechanical properties, and exhibited significantly reduced water absorption.
Authors
- Watcharin Sitticharoen ;
- Uthiyoung, Chet ;
- Nateechai Passadee ;
- Chanokpol Wongprom
Abstract The use of silica based bagasse fiber ash (BFA) as a reinforcing filler in polylactic acid (PLA) biocomposites was examined. The effects of surface-treated BFA on the rheological, swelling behavior, and mechanical properties and water absorption of biocomposites were studied. BFA was treated using a silane coupling agent (Bis-[3-(triethoxysilyl)-propy]-tetrasulfide). Composites with BFA were varied from 5 to 25wt.%. The PLA/BFA composite melts were pseudoplastic non -Newtonion fluid and exhibited a shear thinning behavior. The viscosity of the surface-treated BFA biocomposites was higher than that of the untreated. The viscosity of the composites decreased with increasing BFA content and shear rate. The extrudate swell of the composites increased with increasing shear rate, whereas it decreased with increasing BFA content and die temperature. The extrudate swell tended to be suppressed when surface-treated BFA was used. Silane treated BFA composites showed improvement in their mechanical properties, and exhibited significantly reduced water absorption.
Authors
- Watcharin Sitticharoen ;
- Uthiyoung, Chet ;
- Nateechai Passadee ;
- Chanokpol Wongprom