This is a scan of a three-legged marble table currently on display in the House of the Ceii in Pompeii. The scan was processed in Agisoft Metashape from 134 photos taken on a Nikon Z5. Using Agisoft Delighter, Blender, Marmoset Toolbag, and Substance Painter the scan was delit, decimated, and the textures and material tweaked to create this lower polygon, game ready, version. Enjoy!Source: Objaverse 1.0 / Sketchfab

This is a scan of a three-legged marble table currently on display in the House of the Ceii in Pompeii. The scan was processed in Agisoft Metashape from 134 photos taken on a Nikon Z5. Using Agisoft Delighter, Blender, Marmoset Toolbag, and Substance Painter the scan was delit, decimated, and the textures and material tweaked to create this lower polygon, game ready, version. Enjoy!Source: Objaverse 1.0 / Sketchfab

This public water fountain was scanned as part of the 2022 Pompeii Water and Sanitation Project field school run by the University of Missouri. The fountain is placed outside I.13.10 and is made of grey peperino. The relief on the spout stone is a female head, possibly Juno or a nymph. More photos can be seen here: https://pompeiiinpictures.com/pompeiiinpictures/Fountains/Fountain%2011310.htmThe model was generated in Agisoft Metashape from 187 photos taken using a Nikon Z5. Photo alignment was run on high, as was model generation - model has been decimated for export, and made manifold for 3D printing.Source: Objaverse 1.0 / Sketchfab

This public water fountain was scanned as part of the 2022 Pompeii Water and Sanitation Project field school run by the University of Missouri. The fountain is placed outside I.13.10 and is made of grey peperino. The relief on the spout stone is a female head, possibly Juno or a nymph. More photos can be seen here: https://pompeiiinpictures.com/pompeiiinpictures/Fountains/Fountain%2011310.htmThe model was generated in Agisoft Metashape from 187 photos taken using a Nikon Z5. Photo alignment was run on high, as was model generation - model has been decimated for export, and made manifold for 3D printing.Source: Objaverse 1.0 / Sketchfab

This mosaic fountain is built up against the back wall of a small, lavishly painted, peristyle in the Casa Della Fontana Piccola (VI.8.23). It was scanned as part of the 2022 Pompeii Water and Sanitation Project field school run by the University of Missouri. The facade of the fountain is covered in lavish mosaics bordered by seashells, with a small pool in front. In the pool is a pedestal; on the right a bronze statue of a seated man, and on the left the remains of a small marble statue. The house nextdoor (VI.8.22) is the house of the Fontana Grande, with a slightly larger fountain (Very creative naming!). More information and photos can be seen on Pompeii in Pictures, here: http://www.pompeiiinpictures.com/pompeiiinpictures/r6/6%2008%2023%20p1.htmThe model was generated in Agisoft Metashape from 765 photos taken using a Nikon Z5. Photo alignment was run on high, model generated on medium - model has been decimated for export, and made manifold for 3D printing.Source: Objaverse 1.0 / Sketchfab

This mosaic fountain is built up against the back wall of a small, lavishly painted, peristyle in the Casa Della Fontana Piccola (VI.8.23). It was scanned as part of the 2022 Pompeii Water and Sanitation Project field school run by the University of Missouri. The facade of the fountain is covered in lavish mosaics bordered by seashells, with a small pool in front. In the pool is a pedestal; on the right a bronze statue of a seated man, and on the left the remains of a small marble statue. The house nextdoor (VI.8.22) is the house of the Fontana Grande, with a slightly larger fountain (Very creative naming!). More information and photos can be seen on Pompeii in Pictures, here: http://www.pompeiiinpictures.com/pompeiiinpictures/r6/6%2008%2023%20p1.htmThe model was generated in Agisoft Metashape from 765 photos taken using a Nikon Z5. Photo alignment was run on high, model generated on medium - model has been decimated for export, and made manifold for 3D printing.Source: Objaverse 1.0 / Sketchfab

This public water fountain was scanned as part of the 2022 Pompeii Water and Sanitation Project field school run by the University of Missouri. The fountain is placed outside I.16.4 and is made of grey peperino. The relief on the spout stone is a simple disc. This fountain is heavily restored - the spout stone was found alongside the fountain, and was only replaced in the last 15 or so years (Late 2000's early 2010's). More photos can be seen here: https://pompeiiinpictures.com/pompeiiinpictures/Fountains/Fountain%2011604.htmThe model was generated in Agisoft Metashape from 144 photos taken using a Nikon Z5. Photo alignment was run on high, as was model generation - model has been decimated for export, and made manifold for 3D printing.Source: Objaverse 1.0 / Sketchfab

This public water fountain was scanned as part of the 2022 Pompeii Water and Sanitation Project field school run by the University of Missouri. The fountain is placed outside I.16.4 and is made of grey peperino. The relief on the spout stone is a simple disc. This fountain is heavily restored - the spout stone was found alongside the fountain, and was only replaced in the last 15 or so years (Late 2000's early 2010's). More photos can be seen here: https://pompeiiinpictures.com/pompeiiinpictures/Fountains/Fountain%2011604.htmThe model was generated in Agisoft Metashape from 144 photos taken using a Nikon Z5. Photo alignment was run on high, as was model generation - model has been decimated for export, and made manifold for 3D printing.Source: Objaverse 1.0 / Sketchfab

This public water fountain was scanned as part of the 2022 Pompeii Water and Sanitation Project field school run by the University of Missouri. The fountain is placed against the north side of the Forum, near the entrance to VII.7.26 and is made of grey peperino. The relief on the spout stone is of a dog's head. More photos can be seen here: https://pompeiiinpictures.com/pompeiiinpictures/Fountains/Fountain%2070726.htmThe model was generated in Agisoft Metashape from 170 photos taken using a Nikon Z5. Photo alignment was run on high, as was model generation - model has been decimated for export, and made manifold for 3D printing.Source: Objaverse 1.0 / Sketchfab

This public water fountain was scanned as part of the 2022 Pompeii Water and Sanitation Project field school run by the University of Missouri. The fountain is placed against the north side of the Forum, near the entrance to VII.7.26 and is made of grey peperino. The relief on the spout stone is of a dog's head. More photos can be seen here: https://pompeiiinpictures.com/pompeiiinpictures/Fountains/Fountain%2070726.htmThe model was generated in Agisoft Metashape from 170 photos taken using a Nikon Z5. Photo alignment was run on high, as was model generation - model has been decimated for export, and made manifold for 3D printing.Source: Objaverse 1.0 / Sketchfab